LCC30 driver/dimmer for constant current and voltage LED lights up to 30W, Vadsbo
  • LCC30 driver and dimmer for constant current and voltage LED lights up to 30W
  • LCC9 driver and dimmer for constant current and voltage LED lights up to 9W

LCC30 driver/dimmer for constant current and voltage LED lights up to 30W, Vadsbo

£32.00

£32.00 VAT excluded

Volume discounts

Quantity Discount You Save
10 1% Up to £3.20
20 2% Up to £12.80
50 3% Up to £48.00
100 4% Up to £128.00
200 5% Up to £320.00
Quantity
in-stock

- LED control gear LCC30 (a combination of LED-driver and LED-dimmer in one device).
- Suitable for constant current and constant voltage loads.
- Load up to 30W (see table).
- Dimming: push button retractive/momentary switch, 1-10V

 

You can order online 24/7, all ordered goods will be dispatched as soon as possible and we will notify you via e-mail. For custom made orders please contact us.

 

Orders over £500 (excl. VAT) Standard and Next Day service apply to UK mainland and Northern Ireland only. All orders will be sent by a trackable method.

 

You have the right to cancel your online website order within 14 calendar working days of ordering, or 14 calendar days of receipt of the goods (whichever is the longer).

Input voltage 220-240VAC (screw terminal) 
One output: 
a) Constant current
350mA (2-57V) 1-20W (1-16 st LED)
500mA (2-54V) 2-27W (1-15 st LED)
700mA (2-43V) 3-30W (1-12 st LED)
900mA (2-27V) 4-24 W (1-7 st LED)
b)Constant voltage: 12Vdc(max 10.8W) / 24Vdc(max 21.5W)

Dimming control:
- Primary side: push-button retractive/momentary switches
- Secondary side: 1-10Vdc controller
Quick-connection terminals for easy connection
Easy to install in suspended ceiling thanks its small dimensions (easy entrance into a 65-70mm hole)
Dimensions (LxWxH): 150x52x28mm
Holes for mounting screws to wall or similar surface
Max. ambient temperature: +50ºC
Weight: 250g
Housing: thermoplastic, white
Connection wires: 1.5mm²
Dimming: push-button retractive switch or potentiometer (1-10VDC, I=0.35mA)
Up to 20 units of LCC30 can be controlled by one or several push-button retractive switches (up to 600W of LED)
Synchronization without sync cable
Max. cable lengths (primary side): 15meters between the first driver and push button; 15meters between drivers
Max. cable lengths (secondary side): 20meters to the luminaries; 40 meters in a loop
Mixed loads possible
Soft start
Memory function
Constant voltage protection
Overload protection
Over temperature protection
Approved for mounting on furniture 
DIP-switch: using the DIP switch can set the type of LED you want to dim
Selectable constant currents: 350mA, 500mA, 700mA, 900mA
Selectable constant voltages: 12VDC, 24VDC
Standards: EN55015; EN61547; EN61347-1; EN61347-2-13
Insulation class II
IP20
Approval: S/CE
EMC

LCC30 can be used in a system for driving and dimming of both LED strips and LED lamps in the same time.

V-36030609
9 Items

Data sheet

Dimming Control
Push-button/1-10V controller
Brand
Vadsbo

Download

data sheet

Download (247.48k)

installation

Download (129.57k)

4 other products in the same category: