The Converter AC/DC is exclusively designed to use with electronic transformer (11,5 VAC) for LED strips and LED lamps (12 VDC).
In the case of use Converter AC/DC there is also a possibility to connect the LED sources with a rated voltage 12 VAC.
The Converter AC/DC should be connected only with electronic transformers YT50/YT60, YT70 and YT105. It is possible to use Converter AC/DC with YT150, YT210 and YT250 by connecting several converters in parallel to the electronic transformer output (with uniform load per converter). - see attached table.
Protection devices: overload circuit, temperature and short-circuit (YT electronic transformers).
Input voltage: 11,5 VAC +/-10%, 0-35 kHz
Input current: ≤ 4,5 A
Output voltage: 11,1 VDC +/- 10%
Rated power: 50 W
Nominal output current: ≤ 4,5 A
Output current range: 0 - 4,5 A
Protection degree: IP20
Ambient temperature ta: max. 40 ºC
Case temperature tc: max. 75 ºC
Dimensions: 72x36x26 mm
Input wires: min. 2x1,0 mm2
Output wires: min. 2x1,0 mm2
If the Converter AC/DC is used for purposes other than originally intended, or it is connected in a wrong way, no liability will be assumed for possible damages.