Universal push-rotate dimmer for dimmable HV LED, HV halogen, and more

Universal push-rotate dimmer for dimmable HV LED, HV halogen, and more, PRO-100-LT-LED

Features:
- adjustable between leading and trailing edge phase control with  MICROSWITCH
-  adjustable minimum and maximum of brightness
-  reset  option
- for dimmable HV LED lamps
-  controlled by a rotary potentiometer
-  very low minimum power -  3W
- soft start
- noiseless
- special circuit design to reduce load peak current
- self-resetting protections: overload, over temperature, short circuit
- Operate in stairs circuits with stair’s 2-way switch

Technical data:
- Rated  voltage: 230V ± 10%
- Mains frequency: 50Hz
- Power loss: max 4W
- Output power: 3-100W (LED) 5-250W (incandescent)
- Type of potentiometer axis 19mm length, ∅4 mm, metal axis + adapter to 6mm
- Control power element transistor (leading and trailing edge phase control)
- Current limit: peak  14A
- Protection level: IP20
- Dimensions: 71mm x 71mm x 29mm
- Diameter of flush box: Ø60mm
- Connection: screw terminals
                         single wire: 1x0.5…4.0m²
                         stranded without ferrule: 1x0.5…4.0mm²
                   stranded with ferrule: 1x0.5…4.0mm²
- Weight: 71g
- Additional information microprocessor  control                                                                               


Dedicated light sources: 
- Dimmable HV LED lamp: 3-100W
- LV LED diodes with dimmable CC LED drivers*: 3-100W
- Incandescent bulbs: 5-250W
- HV Halogen lamps: 5-250W
- LV Halogen lamps with dimmable electronic transformers*: 5-250W
- Dimmable CFL lamps, Govena DIMM:  3-60W
(* recommended Govena products: YT50, YT60, YT70, YT105, YT150, YT210, YT250)

Standards:
- EN 60669-2-1
- EN 60669-1
- EN 55015
- LVD 2014/35/EU
- EN 61547
- EMC 2014/30/EU 
- ErP 2009/125/EC (no.278/2009; 1194/2012)
- RoHS 2011/65/EU
- RoHS 2015/863/EU